Android Boot Sequence
Android is linux based open source operating system, x86
(x86 is a series of computer microprocessor instruction set
architectures based on the Intel 8086 CPU.) is most likely system where
linux kernel is deployed however all Android devices are running on ARM process (ARM (formerly Advanced RISC Machine, which was formerly Acorn RISC Machine)) except Intel’s Xolo device (http://xolo.in/xolo-x900-features).
Xolo comes with Atom 1.6 GHz x86 processor. Android boot sequence or I
can say embedded device or ARM based linux has minor difference compare
to desktop version. In this article I am going to explain boot sequence
for Android only. Inside the linux boot process is good article for desktop based linux boot sequence.
Android device execute following steps when you press power switch
 |
| Android Boot Sequence / Process |
Step 1 : Power On and System Startup
When power start Boot ROM code start execution from pre defined location which is hardwired on ROM. It load Bootloader into RAM and start execution
Step 2 : Bootloader
Bootloader is small program which runs before Android operating system running. Bootloader is first program to run so It is specific for board and processor. Device manufacturer either use popular bootloaders like redboot,uboot, qi bootloader or they develop own bootloaders, It’s not part of Android Operating System. bootloader is the place where OEMs and Carriers put there locks and restrictions.
Bootloader perform execution in two stages, first stage It to detect external RAM and load program which helps in second stage, In second stage bootloader setup network, memory, etc. which requires to run kernel, bootloader is able to provide configuration parameters or inputs to the kernel for specific purpose.
Android bootloader can be found at
When power start Boot ROM code start execution from pre defined location which is hardwired on ROM. It load Bootloader into RAM and start execution
Step 2 : Bootloader
Bootloader is small program which runs before Android operating system running. Bootloader is first program to run so It is specific for board and processor. Device manufacturer either use popular bootloaders like redboot,uboot, qi bootloader or they develop own bootloaders, It’s not part of Android Operating System. bootloader is the place where OEMs and Carriers put there locks and restrictions.
Bootloader perform execution in two stages, first stage It to detect external RAM and load program which helps in second stage, In second stage bootloader setup network, memory, etc. which requires to run kernel, bootloader is able to provide configuration parameters or inputs to the kernel for specific purpose.
Android bootloader can be found at
<Android Source>\bootable\bootloader\legacy\usbloaderlegacy loader contain two important files that need to address here.
1. init.s - Initializes stacks, zeros the BSS segments, call _main() in main.c
2. main.c - Initializes hardware (clocks, board, keypad, console), creates Linux tags
Refer this link to know more about Android bootloader :
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/86208/~/bootloader-frequently-asked-questions
Step 3: Kernel
Android kernel start similar way as desktop linux kernel starts, as kernel launch it start setup cache, protected memory, scheduling, loads drivers. When kernel finish system setup first thing it look for “init” in system files and launch root process or first process of system.
Step 4: init process
init it very first process, we can say it is root process or grandmother of all processes. init process has two responsibilities 1. mount directories like /sys, /dev, /proc and 2. run init.rc script.
Android has specific format and rules for init.rc files. In Android we call it as “Android Init Language”
The Android Init Language consists of four broad classes of statements,which are Actions, Commands, Services, and Options.
Action : Actions are named sequences of commands. Actions have a trigger which is used to determine when the action should occur.
Syntax
on <trigger>
<command>
<command>
<command>
Service : Services are programs which init launches and (optionally) restarts when they exit. Syntax
service <name> <pathname> [ <argument> ]*
<option>
<option>
...
Options : Options are modifiers to services. They affect how and when init runs the service.
Let’s take a look of default init.rc file. Here I have listed only major events and services.
2. main.c - Initializes hardware (clocks, board, keypad, console), creates Linux tags
Refer this link to know more about Android bootloader :
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/86208/~/bootloader-frequently-asked-questions
Step 3: Kernel
Android kernel start similar way as desktop linux kernel starts, as kernel launch it start setup cache, protected memory, scheduling, loads drivers. When kernel finish system setup first thing it look for “init” in system files and launch root process or first process of system.
Step 4: init process
init it very first process, we can say it is root process or grandmother of all processes. init process has two responsibilities 1. mount directories like /sys, /dev, /proc and 2. run init.rc script.
- init process can be found at init : <android source>/system/core/init
- init.rc file can be found in source tree at <android source>/system/core/rootdir/init.rc
- readme.txt file can be found in source tree at <andorid source>/system/core/init/readme.txt
Android has specific format and rules for init.rc files. In Android we call it as “Android Init Language”
The Android Init Language consists of four broad classes of statements,which are Actions, Commands, Services, and Options.
Action : Actions are named sequences of commands. Actions have a trigger which is used to determine when the action should occur.
Syntax
on <trigger>
<command>
<command>
<command>
Service : Services are programs which init launches and (optionally) restarts when they exit. Syntax
service <name> <pathname> [ <argument> ]*
<option>
<option>
...
Options : Options are modifiers to services. They affect how and when init runs the service.
Let’s take a look of default init.rc file. Here I have listed only major events and services.
| Action / Service | Description |
| on early-init | Set init and its forked children's oom_adj. Set the security context for the init process. |
| on init | setup the global environment Create cgroup mount point for cpu accounting and many |
| on fs | mount mtd partitions |
| on post-fs | change permissions of system directories |
| on post-fs-data | change permission of /data folders and sub folders |
| on boot | basic network init ,Memory Management ,etc |
| service servicemanager | start system manager to manage all native services like location, audio, shared preference etc.. |
| service zygote | start zygote as app_process |
At this stage you can see “Android” logo on device screen.
Step 5: Zygote and Dalvik
In
a Java, We know that separate Virtual Machine(VMs) instance will popup
in memory for separate per app, In case of Android app should launch as
quick as possible, If Android os launch different instance of Dalvik VM
for every app then it consume lots of memory and time. so, to overcome
this problem Android OS as system named “Zygote”. Zygote enable shared
code across Dalvik VM, lower memory footprint and minimal startup time.
Zygote is a VM process that starts at system boot time as we know in
previous step. Zygote preloads and initialize core library classes.
Normally there core classes are read-only and part of Android SDK or
Core frameworks. In Java VM each instance has it’s own copy of core
library class files and heap objects.
Zygote loading process
1. Load ZygoteInit class,
Source Code :<Android Source> /frameworks/base/core/java/com/android/internal/os/ZygoteInit.java
2. registerZygoteSocket() - Registers a server socket for zygote command connections
3. preloadClasses() - “preloaded-classes” is simple text file contains list of classes that need to be preloaded, you cna find “preloaded-classes” file at <Android Source>/frameworks/base
4. preloadResources() - preloadReaources means native themes and layouts, everything that include android.R file will be load using this method.
At this time you can see bootanimation
Step 6: System Service or Services
After
complete above steps, runtime request Zygote to launch system servers.
System Servers are written in native and java both, System servers we
can consider as process, The same system server is available as System
Services in Android SDK. System server contain all system services.
Zygote fork new process to launch system services. You can find source code in ZygoteInit class and “startSystemServer” method.
Core Services:
1. Starting Power Manager
2. Creating Activity Manager
3. Starting Telephony Registry
4. Starting Package Manager
5. Set Activity Manager Service as System Process
6. Starting Context Manager
7. Starting System Context Providers
8. Starting Battery Service
9. Starting Alarm Manager
10. Starting Sensor Service
11. Starting Window Manager
12. Starting Bluetooth Service
13. Starting Mount Service
Other services
1. Starting Status Bar Service
2. Starting Hardware Service
3. Starting NetStat Service
4. Starting Connectivity Service
5. Starting Notification Manager
6. Starting DeviceStorageMonitor Service
7. Starting Location Manager
8. Starting Search Service
9. Starting Clipboard Service
10. Starting Checkin Service
11. Starting Wallpaper Service
12. Starting Audio Service
13. Starting HeadsetObserver
14. Starting AdbSettingsObserver
Once System Services up and running in memory, Android has completed booting process, At this time “ACTION_BOOT_COMPLETED” standard broadcast action will fire.
Comments
Post a Comment